How to Setup Binatone WR3010 N300 Wireless Router Without Internet @192.168.0.1

How to Setup Binatone WR3010 N300 Wireless Router Without Internet @192.168.0.1

Step By Step Procedure to setup your Binatone Router: Binatone WR3010 N300 router is considered as a wireless router because it offers WiFi connectivity, it allows you to connect various devices to your router.

The ability to access the WiFi signal on your Binatone router is dependent on multiple conditions. The router has security features used to safeguard your connection against intruders.  If these routers are not configured correctly, you may not be able to gain access to your router. Binatone WR3010 N Wireless Router Setup and Configuration full details given below.
In this we provide you the information about how to setup Binatone Router? The below are the steps to follow to setup Binatone Router manually.

Steps to Setup Binatone WR3010 N300 Wireless Router Without Internet Connection @192.168.0.1

The below is the process to follow for setup the Binatone Router manually.

  • To setup the Binatone Router first of all you have to power cycling the modem and router.
  • For that you have to do is unplug the modem and router from the power source.
  • Connect the Ethernet cable from the modem to the WAN or Internet port of the router.
  • And then power on your modem first, then your router by plugging them back to the power source.
  • After doing all this process then you have to setup manually.
  • For that connect your computer to one of the Ethernet ports of the router.
  • And then launch your browser in the system and enter the IP address in the address and press enter.
  • The default Binatone IP address is 192.168.0.1.
  • And then click on login. By using the default username and password {ID:admin & Pass: admin} for the router.

Binatone WR3010N Wireless Router id password Configuration s

  • Then the configuration page will open, in that under the Internet WAN, click Connection type.
  • And then select your connection type and click next.
  • Then enter your ISP details and click on Apply Changes button.
  • Then click on the wireless tab to configure in the setup page. You can change the wireless network name and wireless channel.

By that you can setup your Binatone Router by your own.

For more information about binatone wireless router configuration without internet connection step by step procedure visit our website https://routerpassword.info/

Leave a Reply